Inspection
All safety equipment used as fall protection must be inspected prior to each use, by the employee(s) using the equipment. All full body harnesses, lanyards, retractable lanyards, and horizontal lifelines must be inspected annually by a competent person.
Maintenance
Cleaning of all polyester and nylon components of fall arrest systems can only use mild soap and water. No chemicals are allowed for cleaning. The manufacturer must perform any modifications to the equipment.
Maintenance
All stainless steel lifelines and lanyards can be cleaned by spraying WD 40 and wiping it off. Always wear gloves when handling cables.
Any and all fall protection equipment that has been involved in a fall must be turned in to the site Safety Supervisor.
Storage
Store all personnel fall protection equipment in a clean dry location out of direct sunlight. Example, in your locker.
Training
Any employee using fall protection must receive training. This training will be completed during the Department Safety Meeting. Refresher training shall be completed at least every two years. Training shall consist of the following: